MIL-STD-2414A
5.6.4 Disk products (laser, magnetic). Disk products shall include the bar code and HRI on the front cover of the case, and on the disk's label surface.
5.6.5 Media products. All digital media products (8mm tapes, tape cartridges, etc.) that have NRNs shall be bar coded on the identifying label.
5.7 Print requirements.
5.7.1 Reflectivity and contrast. All requirements of
ANSI/AIM-BC1-1995 shall be adhered to.
5.7.2 Code density and dimension. Code density shall adhere to ANSI/AIM-BC1-1995 to obtain the required space limits as defined in section 5. of this Standard. The dimensions are defined in 5.1.1 of this Standard.
5.7.3 Bar code tolerances. All tolerances shall conform to ANSI/AIM-BC1-1995.
5.7.4 Direct product printing. All Bar codes and HRI shall be printed directly on the paper products as they are printed.
5.7.5 Printing on paper labels. All NIMA bar codes that are printed on paper labels for packaging shall conform to
this specification and in addition must be at least 2mm (.08")
from the edge of the label.
5.7.6 Printing verification. All bar codes shall be verified after printing to assure they can be read by bar code readers and they reflect the correct information.
5.7.7 Bar code. The bar code is acceptable if it can be successfully scanned as defined in ANSI/AIM-BC1-1995.
5.7.8 HRI. The HRI is acceptable if it can be read from a distance of 2 feet by a person having corrected 20/20 vision in an environment having at least one 60 watt light bulb
within 20 feet from the surface.
5.8 Packaging.
5.8.1 Placement of bar codes. The bar code with its HRI shall be located on the top of the package, preferably on the lower right or left hand side.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business